![RUKO Präzisionswerkzeuge](/img/default-banner.jpg)
- Видео 150
- Просмотров 1 081 223
RUKO Präzisionswerkzeuge
Германия
Добавлен 10 янв 2013
Since 1974, RUKO Präzisionswerkzeuge has been one of the world's leading manufacturers of high-quality tools, such as metal drills, concrete drills, wood drills and other products for metalworking.
As a German company with an international orientation, RUKO's claim is to provide professional users with the longest-lasting, highest-quality and fastest tools that are precisely adapted to their needs. In more than 70 countries, RUKO drilling tools are distributed by over 2,300 qualified tool dealers.
For more information, visit us at: ruko.de/en
As a German company with an international orientation, RUKO's claim is to provide professional users with the longest-lasting, highest-quality and fastest tools that are precisely adapted to their needs. In more than 70 countries, RUKO drilling tools are distributed by over 2,300 qualified tool dealers.
For more information, visit us at: ruko.de/en
NEU: Der ULTIMATECUT Kegelsenker 4S HSSE-Co 5. Kann's besser. Kann's schneller. Kann's länger.
Für die leistungsstarke Zerspanung von anspruchsvollen Hardox- und Edelstählen.
Mit seinen speziell entwickelten vier Schneiden und der Ungleichteilung garantiert der ULTIMATECUT Kegelsenker 4S bereits in der HSS Version optimale Senkergebnisse im stationären sowie manuellen Einsatz und das mit deutlicher Zeitersparnis.
Die Verteilung der Kräfte auf die vier Schneiden, reduzieren dabei die Axial- und Radialkräfte, wodurch das Werkzeug geschont und die Standzeit deutlich erhöht wird.
Mit der Erweiterung um die HSSE-Co5 Variante, wird das Anwendungspektrum der Serie ULTIMATECUT 4S mit den Möglichkeiten zur professionellen Bearbeitung von Edelstählen und anspruchsvoller Hardox-Stähle, nochmals...
Mit seinen speziell entwickelten vier Schneiden und der Ungleichteilung garantiert der ULTIMATECUT Kegelsenker 4S bereits in der HSS Version optimale Senkergebnisse im stationären sowie manuellen Einsatz und das mit deutlicher Zeitersparnis.
Die Verteilung der Kräfte auf die vier Schneiden, reduzieren dabei die Axial- und Radialkräfte, wodurch das Werkzeug geschont und die Standzeit deutlich erhöht wird.
Mit der Erweiterung um die HSSE-Co5 Variante, wird das Anwendungspektrum der Serie ULTIMATECUT 4S mit den Möglichkeiten zur professionellen Bearbeitung von Edelstählen und anspruchsvoller Hardox-Stähle, nochmals...
Просмотров: 234
Видео
NEW: The ULTIMATECUT counter sinker 4S HSSE-Co 5. Does it better. Does it faster. Does it longer.
Просмотров 1732 месяца назад
For high-performance machining of demanding Hardox and stainless steels. With its specially developed four cutting edges and unequal spacing, the HSS version of the ULTIMATECUT countersink 4S already guarantees optimum countersinking results in both stationary and manual use, with significant time savings. The distribution of forces across the four cutting edges reduces the axial and radial for...
Nouveau: ULTIMATECUT Fraise conique à chanfreiner 4S HSSE-Co 5.
Просмотров 532 месяца назад
Pour l'enlèvement de copeaux performant d'aciers Hardox exigeants. Grâce à ses quatre arêtes de coupe spécialement développées et à son écartement inégal, la version HSS de la fraise ULTIMATECUT 4S garantit déjà des résultats de fraisage optimaux, que ce soit en utilisation stationnaire ou manuelle, avec un gain de temps considérable. La répartition des forces sur les quatre arêtes de coupe réd...
Foret étagés HSS, avec goujures hélicoïdales et affûtage en croix
Просмотров 366Год назад
Foret étagés HSS, avec goujures hélicoïdales et affûtage en croix
Step drill HSS, spiral fluted with split point
Просмотров 306Год назад
Step drill HSS, spiral fluted with split point
Stufenbohrer HSS, spiralgenutet mit Kreuzanschliff
Просмотров 477Год назад
Stufenbohrer HSS, spiralgenutet mit Kreuzanschliff
La nouveau et sensationnel fraise ULTIMATECUT 4S
Просмотров 108Год назад
La nouveau et sensationnel fraise ULTIMATECUT 4S
ULTIMATECUT countersink 4S works with four instead of three cutting edges
Просмотров 354Год назад
ULTIMATECUT countersink 4S works with four instead of three cutting edges
ULTIMATECUT Kegelsenker 4S arbeitet mit vier statt drei Schneiden
Просмотров 712Год назад
ULTIMATECUT Kegelsenker 4S arbeitet mit vier statt drei Schneiden
Starte jetzt deine Ausbildung bei RUKO!
Просмотров 297Год назад
Starte jetzt deine Ausbildung bei RUKO!
REPACK by RUKO - sans plastique, recyclable, compostable
Просмотров 78Год назад
REPACK by RUKO - sans plastique, recyclable, compostable
REPACK by RUKO - plastikfrei, recyclebar, kompostierbar
Просмотров 194Год назад
REPACK by RUKO - plastikfrei, recyclebar, kompostierbar
REPACK by RUKO - plastic-free, recyclable, compostable
Просмотров 114Год назад
REPACK by RUKO - plastic-free, recyclable, compostable
RUKO ULTIMATECUT twist drill with FLOWSTEP® tip vs. standard twist drill
Просмотров 3,9 тыс.2 года назад
RUKO ULTIMATECUT twist drill with FLOWSTEP® tip vs. standard twist drill
RUKO ULTIMATECUT step drill with FLOWSTEP® tip vs. standard step drill
Просмотров 1,5 тыс.2 года назад
RUKO ULTIMATECUT step drill with FLOWSTEP® tip vs. standard step drill
RUKO Unboxing Professional metal cutting set HSSE Co5 245013E
Просмотров 5082 года назад
RUKO Unboxing Professional metal cutting set HSSE Co5 245013E
RUKO Unboxing Professional metal cutting set HSS 245013
Просмотров 2802 года назад
RUKO Unboxing Professional metal cutting set HSS 245013
RUKO Unboxing Professional metal cutting set HSS 245012
Просмотров 2122 года назад
RUKO Unboxing Professional metal cutting set HSS 245012
RUKO Bi-metal hole saw HSS with varied toothing in metal sheet, sheetrock, plastics and wood
Просмотров 1,3 тыс.2 года назад
RUKO Bi-metal hole saw HSS with varied toothing in metal sheet, sheetrock, plastics and wood
RUKO Step drill HSS, spiral fluted with split point in plexiglas, structural steel and wood
Просмотров 3322 года назад
RUKO Step drill HSS, spiral fluted with split point in plexiglas, structural steel and wood
RUKO Screw-hole punches with three-point cutting tip in stainless steel
Просмотров 1,4 тыс.2 года назад
RUKO Screw-hole punches with three-point cutting tip in stainless steel
RUKO Twist drill DIN 338 type N, HSS-G in structural steel
Просмотров 6552 года назад
RUKO Twist drill DIN 338 type N, HSS-G in structural steel
I've been using these for 4 years now, I'll NEVER go back to any other product. Honest. I even managed to cut through inox 254SMO with one of these bits.
Do you have any information about how to properly sharpen drills, how you recommend sharpening spiral ones with regular sharpening angles and such innovative ones? Are there any sharpening machines available from your company for convenient sharpening of drill bits? Is it possible to use twist drills with a cylindrical shank (HE HB HA) in magnetic drilling machines with Morse taper 2 in clamps with a collet? What suitable drill chucks are there for them?
If you want to get information about sharpening please have a look at Kaindl Online Shop: Werkzeuge, Zubehör und Maschinen . If you want to use a drill with cylindrical shank in a machine with MK2 you need a special drill chuck. Our article number 108117 and 108120. Please have a look at our homepage www.ruko.de.
Zentrierung vergessen. (Bohrer ist verlaufen auf Grund des Wandern der Querschneide) Falschen Bohrer für Stahl benutzt. (Typ N wäre besser.) Senker zu schnell (U/min)
Tolles!
Oder einen Nassen Schwamm daneben legen aus dem Wasser ausläuft. Die Pfütze kühl
Was soll der Scheiss 😬😬😬. Bohremulsion aus der Flasche!!!!
Jawoll, das macht dann eine Dose je Bohrung 👍🏼
P R O M O S M 😘
Is das schon veraltete rechnung Technik oder warum die Kommentare?
Ja, damals, als wir noch Holz und Steine essen mussten.
Why do you check with a tri-square? The tap is going to follow the hole. Checking angle is only necessary when cutting external threads with a die.
Ja, vor 25 Jahren in meiner Ausbildung zum IMMS ;-)
Beim Gewindeschneiden hilft vorher der Bohrer von Spänen säubern und ölen wie in diesem Video ruclips.net/video/XyJaDEv_x9Y/видео.html
Beim Gewindeschneiden hilft vorher der Bohrer von Spänen säubern und ölen wie in diesem Video ruclips.net/video/XyJaDEv_x9Y/видео.html
kann ich sie in holz/plastik auch benutzen?
Er funktioniert super in Kunststoffe. Für Holz ist er nicht gedacht, klappt aber trotzdem
Ach komm, das ist doch Pfusch. Man kann doch nicht einen Drall von der kleinsten Stufe bis zur größten ziehen. Irgendwo muss der Span auch hin
Any reason to use this over a hole saw?
The punch is better for thin materials because a hole saw will deform the sheet metal
Absolute tune pal what’s the name of this absolute banger my guy it was so radical 👑👑👑🤘🤘🤘🤘🤘
Name of song plz
Absolute banger mate. Cheers for the vid🎉🎉🎉🎉😂😢😂😮😅
Alles schön und gut, aber ich habe das problem, daß schon bei einem 10 mm Alurundstab, das Drehmoment so hoch ist, daß ich das nicht mehr fest eingespannt bekomme (ohne den Stab zu demolieren). Da dreht sich dann der Stab mit.
Es geht NICHTS über Qualität. Sollten wir DEUTSCHEN wieder zurückfinden und den Mist "GEIZ IST GEIL" endlich hinter uns lassen. Habe mir gerade einen Stufenbohrer bestellt.
What was the point of measuring the screw head? How did you determine the proper counter sink size and depth?
You have to measure the diameter to choose the right countersink. In this case it is 10.2 mm of the screw head, then you take the countersink with the maximum diameter 10.4, i.e. if you go all the way in with this countersink, up to this maximum diameter, you have enough leeway. With the 10.2 mm, you don't have to go all the way to the maximum diameter. It's just a matter of feeling your way around.
Why three taps?
Here you´ll find the answer to your question: ruko.de/en/knowledge/know-how/six-features-of-internal-taps-at-a-glance
Auch im muss Kritik üben. Nach dem Fertigstellen des Gewindes sollte man den Schneidgrat entfernen. Nur ein bisschen mit Schmirgel drüber gehen
Gutes Video. Warum wurde beim Vorschneider nicht auf Winkligkeit überprüft? Hier kann ich noch am meisten korrigieren. Beim Mittelschneider wurde nur in der X Achse überprüft. Die andere aber nicht. Beim Fertigschneider kann ich so gut wie nichts mehr verbessern. Die Bruchgefahr ist zu groß.
Hole
Perfect. 🤩🇧🇷
salam.jenama apa ni boss
It is a RUKO tool
❤❤❤❤❤❤😂😂😂😂🎉🎉
Rollgewalzt? Bitte nicht
😄 👍
Unlock Your Online Potential with Quality Management Dear Ruko Shop Team, We at Quality Management believe that every business has untapped online potential waiting to be unlocked. That's why I would like to offer our expert SEO and digital marketing services to help your business reach its full online potential. Our team has a proven track record of delivering results, and we are confident that we can do the same for you. Please let me know if you're interested in learning more about our services. I would be happy to schedule a call and provide a personalized proposal for your business. Best regards, Shehar Yar Quality Management
Ich hatte mir vor einiger Zeit einen Satz der weiß lackierten Lochsägen im Koffer gekauft. Später habe ich noch verschiedene Größen hinzugekauft, beispielsweise die Lochsäge mit dem Durchmesser von 68 mm für die Elektroinstallation. Als ich das erste Mal damit ein Loch in die Gipskartonplatte gebohrt habe, war ich doch recht ernüchtert. Die Lochsäge eierte dermaßen auf dem Zentrierbohrer, daß ich die Hohlwanddose anschließend ganz locker durch die Bohrung hindurchstecken konnte. Nachdem ich ein kleines Stück OSB-Platte hinter die Gipskartonplatte geleimt und die Hohlwanddose mit reichlich Isolierband umwickelt hatte, hielt sie dann endlich. Mit anderen Lochsägen ist das noch nicht passiert. Wahrscheinlich ein Montags-Exemplar.
Heil
Terrible blades can’t cut anything biggest scam
We are sorry that you had a bad experience with our product. Maybe you would like to tell us what exactly didn´t worked?
Hello, it's good for plexiglass?
Hello Florinel, you can use it for plexiglass, but due to the heat that exists while drilling, it could melt. So be careful with the speed.
@@RUKOGmbH thank you 🙏
Try go 1cm deeper :)
Wow stabil maschallah 👑♥️🥵🗿♥️❤️😎
iv tried like 3-4 times threading a pipe. imposible to get it straight..
🅿🆁🅾🅼🅾🆂🅼
Kann man damit ein schon vorhandenes Loch vergrößern (30 auf 35mm)?
Grundsätzlich lassen sich mit Schraublochstanzen bestehende Löcher erweitern. Um einen Durchmesser von 30mm auf 35mm zu erweitern, empfehle ich in diesem Fall dies mit einem Blechschälbohrer oder Stufenbohrer zu machen.
What is the best type of tap to use for stainless steel.i’m tapping in panic devices and closers andnimmusingbtappingbfluid but they are just not lasting more than 2 holes
The best tap quality for stainless steel are our taps co5 coated with TIAIN. But be careful, if the material is hardened or heat treated it is difficult to cut a thread.
@@RUKOGmbH Thank you.I’m installing door hardware on a stainless Steele door.do you have a link to where I can purchase?
@@jimmys511 ruko.de/en/company/retailer here you can find a retailer
nach so einer reperatur hällt ein Gewinde besser wie vorher, besonders in Alu :)
Cooles Video 😊 tolles Werkzeug 😍
After the chamfering and first start up using hand double check that piece and the tap are perpendicular then use the tool for the tap and the first thread instead of using the tool to avoid swinging and to prevent the start up damage.
Danke, genau solch ein Video habe ich gesucht
Das freut uns!
Q about measurements. What is the ratio of hole size to screw size. For instance, if I want to cut a threaded hole to accept a 1/2" bolt, what size pilot hole would I drill? I am assuming something smaller than 1/2". Is that right?
Correct. The exact formula for the hole is: core hole diameter = thread diameter - thread pitch. Blog here: ruko.de/en/blog/how-to-cut-an-internal-thread Here is the PDF with the overview for metric threads: ruko.de/assets_ruko/downloads/RUKO_thread_tabel.pdf
Prima Video. Danke! Welchen Metallbohrer (Größe) nehme ich für welche gewünschte Gewindestärke (4, 6, 8, 10)?
Beim Innengewinde muss das sogenannte Kernloch für das jeweilige Gewinde vorgebohrt werden. Z.B. wird für das Innengewinde M10 mit 8,5mm vorgebohrt. Im Blogbeitrag findest du mehr Infos und auch eine Tabelle: ruko.de/de/blog/wie-schneide-ich-ein-innengewinde
@@RUKOGmbH Ganz herzlichen Dank für die Infos. RUKO Set ist bereits bestellt! LG
@@claudebukovski6869 das freut uns sehr! :)
Gewindegröße in Millimeter x 0.85 = Kernlochdurchmesser in Millimeter
What did u spray ? Is that necessary ? And from where i can get this tapping set?